Features

  • Excellent reading capabilities
  • Enhanced code reconstruction with the Puzzle Solver˘â technology
  • PDF417 bar code decoding (model TC1100-0200 only)
  • Flexible interface ˇ°All in Oneˇ± architecture: RS232, Wedge and Pen emulation
  • DL Sm@rtSet˘â: Windows-based programming tool
  • Light weight
  • Compact dimensions
  • Interface

  • RS232, Wedge, Pen emulation


  •  

     

    Features

  • Scanning speed of 500 scans/s
  • Motor on/off software commands
  • Cost effective
  • Very compact dimensions for both direct/90° reading window models
  • Wide reading width at a short reading distance
  • Lightweight <100 g (<3.53 oz)
  • Dual high speed serial interface (RS232/RS485)
  • Interface

  • RS232+RS485 half duplex

  •  

     

    Features

  • Ultra compact dimensions 50 x 40 x 28 mm (1.97x1.57x1.10 in)
  • Lightweight 150 g (5.29 oz)
  • New generation built-in real time RISC decoder
  • Very high density code reading (up to 0.076 mm / 3mils)
  • Scanning speed of 500 scans/sec
  • Dual serial interface
  • Easy set up through WINHOST˘â
  • IP65 rugged industrial housing
  • Interface

  • 2 x RS232 or 1 x RS485 (full or half duplex) SW selectable


  •  

     

    Features

  • Ultra compact dimensions 50 x 40 x 28 mm (1.97x1.57x1.10 in)
  • Lightweight 150 g (5.29 oz)
  • New generation built-in real time RISC decoder
  • Very high density code reading (up to 0.076 mm / 3mils)
  • Scanning speed of 500 scans/sec
  • Dual serial interface
  • Easy set up through WINHOST˘â
  • IP65 rugged industrial housing
  • Interface

  • Dual serial interface (RS232+RS485 half duplex)

  •  

     

    Features

  • Increased read rate on low contrast and dirty bar codes
  • Embedded ID-NET˘â high speed connectivity to simplify data collection and cluster wiring
  • Intuitive X-PRESS˘â interface for quick scanner installation and troubleshooting
  • Easy setup through multi-language Genius˘â SW tool
  • ACB˘â advanced code builder technology improves the read rate on damaged bar codes
  • Motor on/off and motor speed SW programmable for higher reliability
  • IP65 rugged industrial housing
  • Interface

  •  

  •  

     

    Features

  • Increased read rate on low contrast and dirty bar codes
  • Embedded ID-NET˘â high speed connectivity to simplify data collection and cluster wiring
  • Intuitive X-PRESS˘â interface for quick scanner installation and troubleshooting
  • Easy setup through multi-language Genius˘â SW tool
  • ACB˘â advanced code builder technology improves the read rate on damaged bar codes
  • Motor on/off and motor speed SW programmable for higher reliability
  • IP65 rugged industrial housing
  • Interface

  • Main port RS232/RS485 SW selectable up to 115.2 kbps
  • Aux. port RS232 up to 115.2 kbps
  • ID-NET˘â port up to 1 Mbps


  •  

     

    Features

  • Reading distance up to 1,000 mm
  • Display and keypad
  • Auto learning function
  • Real time decoder
  • Good reading performances on very low contrast bar codes
  • Oscillating mirror available
  • Internal heater for cold environments
  • Interface

  • One RS232, one SW programmable RS232 / RS485 Multidrop

  •  

     

    Features

  • Reading distance up to 1,000 mm
  • ACR˘â code reconstruction
  • Real time decoding with new DSP
  • Good reading performances on very low contrast bar codes
  • Oscillating mirror available
  • Two software programmable outputs
  • WinHost˘â programming
  • Interface

  • One RS232, one SW programmable RS232 / RS485 Multidrop

  •  

     

    Features

  • Step-a-Head˘â feature
  • ˇ°2-step" optic
  • Built-in connectivity to Ethernet / Devicenet / Profibus
  • Reading range from 250 to 2,000mm
  • Advanced decoder with code reconstruction capability (ACR4)
  • Good reading performance on very low contrast bar codes
  • Linear and integrated OM versions
  • Display and keyboard
  • Interface

  • Main Interface: RS232/RS485 (20mA C.L. as optional)
  • Auxiliary Interface: RS232

  •  

     

    Features

  • New "FLASH˘â" dynamic focus
  • Totally SW controlled
  • Reading range from 300 to 2500 mm
  • Advanced decoder with code reconstruction capability (ACR4)
  • Linear and integrated OM versions
  • Display and keyboard
  • GENIUS˘â SW configurator
  • Built-in connectivity to Ethernet / Devicenet / Profibus
  • PackTrack˘â function
  • Interface

  • Main Interface: RS232 /RS485 (20 mA C.L optional)
  • Auxiliary Interface: RS232 /RS485 (20 mA C.L optional)

  •  

    Features

  • Industrial omni-directional scanner
  • FLASH˘â dynamic focus on the DX6400
  • GENIUS˘â configuration program
  • Display and 3-key keypad
  • Built-in Ethernet with TCP/IP protocol
  • Interface

  • Main Interface: RS232 / RS485 (20 mA C.L. optional)
  • Auxiliary Interface: RS232 / RS485 (20 mA C.L. optional)

  •  

     

    Features

  • Reading performance benchmark
  • ACR˘â-4 code reconstruction algorythm
  • ASTRA˘â technology for the electronic focusing system
  • Digitech˘â signal processing technology
  • PACKTRACK˘â to minimize the gap between objects and increase system productivity
  • GENIUS˘â multi-language SW for easy scanner configuration/setup
  • Display and keyboard
  • Built-in Ethernet TCP/IP connectivity on some versions
  • Interface

  • Main interface RS232/RS485 Half Duplex and Full Duplex Baud rate 115,200 bauds
  • Aux. interface RS232

  •  

     

    Features

  • Omni-directional reading
  • ACR˘â-4 code reconstruction algorythm
  • ASTRA˘â technology for the electronic focusing system
  • Digitech˘â signal processing technology
  • PACKTRACK˘â to minimize the gap between objects and increase system productivity
  • GENIUS˘â multi-language SW for easy scanner configuration/setup
  • Display and keyboard
  • Built-in Ethernet TCP/IP connectivity on some versions
  • Extended power supply range (85 to 264 Vac)
  • New version DX8200 controller
  • Interface

  • Main interface RS232/RS485/Half Duplex and Full Duplex; Baud rate 115,200 bauds;
  • Aux. interface RS232 LONWORKS Net with Master/Slave (Baud rate: 1,250 Mbauds)

  •  

     

    Features

  • Outstanding decoding performance on very low quality labels under plastic film
  • High reading performance even on very fast conveyors
  • Multi-side modular solution
  • Linear CCD technology
  • Advanced patented autofocus system
  • Image saving capability
  • Easy replacement concept
  • Diagnostics and remote control
  • Integration with laser systems
  • Interface

  • Serial RS232, Serial RS422/RS485, two 10/100 Mbps Ethernet


  •  

     

    Features

  • Higher Throughput even on fast applications
  • Automatic Region Of Interest Finder
  • Automatic Image selection and adjustment
  • Customizable Data Entry Form
  • Built-in customer database to help keying activities
  • Multi-camera systems supported
  • Image and Data Storage
  • High Investment Return
  • Interface

  •  

  •  

     

    Features

  • Outstanding decoding capability: 1D, 2D, Postal, Stacked
  • Excellent performance on DPM application
  • Application speed up to 6 m/s
  • Region of Interest Windowing for higher frame rate
  • Autolearning function for easy and intuitive set-up
  • Run Time Self-Tuning for higher readiness
  • Up to 100 codes in a single frame
  • Symbol Verification Capability
  • Image management capability
  • Ethernet connectivity
  • Extensive optical solution
  • Interface

  •  

  •  

     

    Features

  • Up to 30 frames/s (1800 frames/min)
  • Up to 100 code readings in a single frame
  • 1D & 2D, stacked, postal code reading
  • Internal image buffering
  • Image transfer capability
  • Code quality control (AIM standards)
  • Integrated LED lighting system
  • Interface

  • RS232 (aux) + RS485 half-duplex (main); up to 115.2 Kbit/s

  •  

     

    Features

  • 1,3 (SXGA) & 2,0 (UXGA) MPixels models
  • Adjustable focus through C-Mount lenses
  • Outstanding decoding capability on 1D, 2D, Stacked, Postal symbologies
  • Excellent Performance on DPM Application
  • Region Of Interest Windowing for higher frame rate
  • Blue Diamonds˘â aiming and focusing system
  • X-PRESS˘â for easy and intuitive setup
  • Run Time Self Tuning for higher flexibility
  • Code Quality Verification Capability
  • Ethernet Connectivity
  • Interface

  • RS232 + RS232/RS422/RS485 up to 115.2 Kbit/s Ethernet IEEE 802.3 10 Base T and IEEE 802.3U 100 BaseTx compliant

  •  

     

    Features

  • Standardization: unique solution for the entire Datalogic range
  • Fast installation and maintenance: Ease and flexibility in the cabling operation, Fast access to the auxiliary interface of the product, Power supply switch and LED
  • Possibility to GET/STORE and SEND the configuration of the connected products
  • Connectivity to Profibus DP and DeviceNet
  • Display versions
  • Winhost˘â configuration SW
  • Cost Effective
  • Interface

  • c-box 150: DS1100, DS2200, DS2100A, DS2400A, DS4600A, DS6X00, DX6X00, DS8100A, DX8200A
  • c-box 200: DS2100A, DS2400A, DS4600A, Matrix˘â
  • c-box 300: DS2100A, DS2400A, DS4600A, Matrix˘â
  • c-box 310: DS2100A, DS2400A,
  • c-box 400: DS2100A, DS2400A, DS4600A, Matrix˘â
  • c-box 410: DS2100A, DS2400A, DS4600A, Matrix˘â

  •  

     

    Features

  • Industrial controller for multi-side reading stations
  • DARP˘â (Datalogic Automatic Replacement Procedure) function
  • High performing CPU
  • GENIUS˘â configuration program
  • Display and 6-key keypad for diagnostics/statistics
  • Robust alloy case
  • Built-in Ethernet, Profibus and Devicenet connectivity
  • Modem connection
  • Interface

  • Main: RS232/RS485F isolated
    Aux: RS232
    Modem: RS232

  •  

     

    Features

  • High speed data collection from up to 32 reading stations
  • RS485 for data collection
  • Serial, Interbus-S, Profibus-DP host interfaces
  • Multiplexer set up through Winhost˘â or backlit display and keypad
  • Winhost˘â remote scanner control and set up
  • Rugged industrial housing
  • Interface

  • Host Standard Interface: Programmable RS232 /RS485 Polled ? non polled /20 mA C.L. /Up to 115.2 Kbauds
  • Auxiliary Interface: RS232/Up to 19.2 Kbauds